Re-pairing the A350
If the headset and the transmitter seem unpaired then you can try to repair them.
Make sure both of them are switched on and the LED's are flashing
Press the small pair button under the pair LED on the transmitter - you should see the LED flash fast red and blue.
Then try pressing the - Volume & +Volume buttons on the headset at the same time for about 5 seconds to get them in discovery mode (If the LED’s stop flashing on either unit – turn off and then on again and repeat the pairing process).
When in pairing mode the headset LED should flash a little faster. When they pair you should hear 3 bleeps from the headset. It might take a few times to pair since there are a lot of channels to search - so repeat the process till they are properly paired.
